Well, today was a very productive day in the wood shop. There is a series of bowls that I began making last month that have been drying out and need to be re-cut today and well be doing that in a moment and I also have decided to try to do some hand carving again by carving a wooden spoon for a friend of mine. Since there are so many photographs, Im going to do this as a two-part posting.
Part I - The bowls
Last month, I began a series of bowls that were ordered by a friend of mine for her family and I made the bowls out of hickory, pecan, red elm, camphor, and some other wood whose name escapes me at the moment*. The hickory and pecan bowls have been completed and delivered and this leaves the last three bowls still being worked on. I rough cut them last month and placed them in drying bags and I took them out last night to look at them and to see if they have cracked or distorted.
Good news-the bowls have all survived the preliminary cutting and drying with minimal distortion. So its time to re-cut them again.
Bowls made out of unseasoned wood will shrink and distort while they dry out. Lets take a look at one of the bowls:
This photograph shows the bowl after its been re-cut and made round again:
And I spent a portion of the day re-turning all of the bowls in the drying bag:
You can see how the bowls in the bottom photo have been rounded and the walls and bottom of the bowls thinned out.These bowls are 10 inches x 3 inches. Here is a photo of a large hickory bowl from last month:
This bowl is longer than it is tall and it still has the potential to distort while drying so I didnt cut it too much.All of the bowls above will be going back into the drying bag for another month and then Ill take them out and cut them to their final shapes and sizes. Well do this at the end of June.
Ok, my next posting is about the spoon Ive begun making so lets go on to part 2.VW
Langganan:
Posting Komentar (Atom)
0 komentar:
Posting Komentar