Well, I was hoping to post pictures of the completed woodstove fence, but I hit a snag. The snag is I havent completed it yet. Really though, I am close...really.
So, in the meantime, I thought I would do a short post on the dogs that I use with my bench and vise. Gerald agreed to help out, and also suggested the clever title.
This shot shows three variations of my birch bench dogs. The dog in the back is the original design. It has a full length groove with a wooden spring to hold it in place in the dog hole. It works fine, but dust and gunk find their choice down the groove and get stuck behind the spring, gumming up the works.
So I altered the design - changing the groove to a stopped groove, which solved that problem nicely. The front two dogs are of this second design.
The dog in the front, with its spring unscrewed, has been altered to function in the dog hole that somehow ended up over the vise hardware. You can see how simple the spring is - just a thin strip of birch, with a taper on the bottom end, screwed into the groove.
Heres another shot showing the spring in place. Notice how nicely the "cut achoice" dog allows you to see the spring. I planned that. Yeah, forget what I said about having to alter the dog to work around a mistake on my bench. Thats my custom "demonstration" dog.
I also replaced the metal vise dogs with wooden dogs. They are much more forgiving on the occasional edged tool that wanders too close.
Heres the vise dog out of his hole. Just a piece of birch, sized to the hole, drilled and fitted with a threaded insert. I was careful to arrange things so that the thumb screw pushes the insert into the dog when things tighten up. Its a little beat up, including a split in the bottom, but it is still functioning fine after years of hard work. Good dog!
0 komentar:
Posting Komentar