After the vertical partitions were dried, I got to work final fitting all the shelves and got those lightly glued into place. Lastly, I put the center doors back in and did the final fitting of those to make sure I had enough clearance all the choice around each door. Then it was time to do any glue removal and finish sanding to prepare for the finish. One thing I like to do is to wait a few hours for the dust to settle, literally, then wipe the whole piece down with mineral spirits. This does a couple of things. First, it gets all the saw dust off of the piece. Next, it allows you to see any blemishes or glue spots that you may have missed and allows you to touch those up before putting on the finish.
For the finish I am applying a couple coats of Watco Danish Oil. Once that is good and dry (after a few days) I am going to spray several coats of shellac on it. This may be about another week or so achoice as the weather is supposed to turn pretty cold again for the next several days.
A couple construction Items I still need to do are to scrape and sand the top, rout the profile on it and apply the finish. I also need to feet on the base as well, but that will be last. Nearing the end!
Be Safe!
0 komentar:
Posting Komentar