Well, I put the finishing touches on the coffee table yesterday so this project is officially DONE! Overall, this project did not take terribly long, considering I have a day job and all. After I did all the final sanding and everything, I wet sanded with 400 grit paper and some Boiled Linseed Oil (BLO). After I let that dry a bit, I then used Watco Danish Oil, Dark Walnut, and went over the whole piece, again wet sanding it in. I did two coats of that and let it dry for about a week. Then, I applied 3 coats of a satin wipe on polyurethane. After the third coat, I lightly sanded with 400 grit paper and applied two more coats. Lastly, I put a light coat of paste wax on it and buffed it out. Below are a couple pictures.
From Coffee Table
In this first picture you can see the legs from all angles as well as the double beed detail on the top.
From Coffee Table
This pictures shows the crazy grain in the top; this was NO FUN to plane, but I just took my time and made very, very light passes. I really like the look of this particular piece of mahogany. You can also see the scalloped edges in this shot. Overall, I really enjoyed this project. I tried several new things to test my skills; first time using mahogany, first cabriole leg, first shaped aprons, first scalloped top, first double beed. Even with all of these "new" things, it was one of the easiest projects Ive ever done. I probably did my most thorough job of planning and thinking through each step with a focuse on the next step. I definately increased my abilities and concured the fear of trying new things in woodoworking, as well as better planning. Lots to build off of as a result of this project!
0 komentar:
Posting Komentar